User's Manual
WiFiBroadbandBG
BDE761AM-001 User Manual 23
3.1.1.1 Physical Interface
Click on the “Edit” button for each WAN interface and you can get the detail physical
interface settings and then configure the settings as well.
1. WAN-1: The operation mode of this interface is forced to “Always-on” mode,
and operates as the primary internet connection. You can click on the respective
“Edit” button and configure the rest items for this interface.
2. WAN-2: The operation mode of this interface is disabled by default, you can click
on the respective “Edit” button and configure the second WAN interface to
operate as “fail over” mode, so that when the WAN-1 connection broken, the
device will try to failover the internet connection to WAN-2.
3. Physical Interface: Select the WAN interface from the available list. For this