Service manual

ENGLISH
SERVICE MANUAL
8
9096982000(1)2007-02 Adnity
TM
17 ST, 20 ST, 20 D, X 20 D, X 20 C, X 24 D
GENERAL INFORMATION
TECHNICAL DATA (For Adnity
TM
20 D - X 20 D - X 20 C - X 24 D)
Model
Adnity
TM
20 D
(1 brush/pad-
holder)
Adnity
TM
X 20 D
(1 brush/pad-
holder)
Adnity
TM
X 20 C
(2 cylindrical
brushes)
Adnity
TM
X 24 D
(2 brushes/pad-
holders)
Machine height 42.8 in (1,088 mm)
Solution/clean water tank capacity 15.3 gal (58 litres)
Recovery water tank capacity 16.0 gal (60 litres)
Front wheel diameter 9.8 in (250 mm)
Front wheel specic pressure on the ground * 174 lbf/in
2
(1.2 N/mm
2
)
Rear wheel specic pressure on the ground * 667 lbf/in
2
(4.6 N/mm
2
)
Rear wheel diameter 3.9 in (100 mm)
Vacuum system motor power 0.44 hp (330 W)
Drive system motor power 0.27 hp (200 W)
Drive speed (variable) 0 to 3.5 MPH (0 to 5.6 km/h)
Gradeability 2%
Sound pressure level at workstation 65.8 dB(A)
Standard batteries WET (2 x 12V) 24V 130 Ah
Battery compartment size (width x length x height) 13.8 x 13.8 x 11.8 in (350 x 350 x 300 mm)
Vacuum system circuit capacity 41.5 in H
2
O (1,055 mm H
2
O)
Technical data for machines with brush/pad-holder deck
Model
Adnity
TM
20 D
(1 brush/pad-holder)
Adnity
TM
X 20 D
(1 brush/pad-holder)
Adnity
TM
X 24 D
(2 brushes/pad-
holders)
Cleaning width 21.0 in (530 mm) 24.0 in (610 mm)
Squeegee width 30.0 in (760 mm) 32.0 in (810 mm)
Machine maximum length 52.1 in (1,323 mm) 51.6 in (1,311 mm)
Machine width without squeegee 21.3 in (541 mm) 25.4 in (646 mm)
Brush diameter 21.0 in (530 mm) 12.0 in (305 mm)
Weight without batteries and with empty tanks 225.0 lb (102 kg)
Maximum weight with batteries and full tanks 551.1 lb (250 kg)
Brush motor power 0.64 hp (480 W) 0.47 hp (350 W)
Brush speed 153 rpm 230 rpm
Brush/pad-holder pressure with extra-pressure
function turned off
45.2 lb (20.5 kg)
Brush/pad-holder pressure with extra-pressure
function turned on
61.3 lb (27.8 kg)
(*) Machine set-up:
max size battery
max size brush deck / squeegee
solution tank full
optionals installed
weight veried on each wheel
print area veried on concrete for each wheel
result expressed as max. value for front and max value for rear wheels
•
•
•
•
•
•
•