Service manual

SERVICE MANUAL
ENGLISH
Adnity
TM
17 ST, 20 ST, 20 D, X 20 D, X 20 C, X 24 D 9096982000(1)2007-02
7
GENERAL INFORMATION
TECHNICAL DATA (For Adnity
TM
17 ST - 20 ST)
Model
Adnity
TM
17 ST
(1 brush/pad-holder)
Adnity
TM
20 ST
(1 brush/pad-holder)
Machine height 41.6 in (1,058.5 mm)
Solution/clean water tank capacity 10.5 gal (40 litres)
Recovery water tank capacity 10.5 gal (40 litres)
Front wheel diameter 7.8 in (200 mm)
Front wheel specic pressure on the ground * 174 lbf/in
2
(1.2 N/mm
2
)
Rear wheel specic pressure on the ground * 435 lbf/in
2
(3 N/mm
2
)
Rear wheel diameter 3.9 in (100 mm)
Vacuum system motor power 0.44 hp (330 W)
Gradeability 2%
Sound pressure level at workstation 65.8 dB(A)
Standard batteries WET (2 x 12V) 24V 105 Ah
Battery compartment size (width x length x height) 13.8 x 13.8 x 11.8 in (350 x 350 x 300 mm)
Vacuum system circuit capacity 41.5 in H
2
O (1,055 mm H
2
O)
Cleaning width 18.0 in (450 mm) 21.0 in (530 mm)
Squeegee width 30.0 in (760 mm)
Machine maximum length 46.8 in (1,190 mm) 48.3 in (1,228 mm)
Machine width without squeegee 20.1 in (512 mm) 21.2 in (540.8 mm)
Brush diameter 18.0 in (450 mm) 21.0 in (530 mm)
Weight without batteries and with empty tanks 194.0 lb (88 kg)
Maximum weight with batteries and full tanks 479.6 lb (218 kg)
Brush motor power 0.65 hp (480 W)
Brush speed 153 rpm
Brush/pad-holder pressure 42.0 lb (19.0 kg) 45.1 lb (20.5 kg)
(*) Machine set-up:
max size battery
max size brush deck / squeegee
solution tank full
optionals installed
weight veried on each wheel
print area veried on concrete for each wheel
result expressed as max. value for front and max value for rear wheels
•
•
•
•
•
•
•