Service manual

ENGLISH
SERVICE MANUAL
54
9096982000(1)2007-02 Adnity
TM
17 ST, 20 ST, 20 D, X 20 D, X 20 C, X 24 D
OTHER SYSTEMS
SCREW AND NUT TIGHTENING CHECK
Drive the machine to the appointed disposal area, and empty the recovery water tank (21) with the hose (16).
Place the machine on a hoisting system (if available).
Otherwise, drive the machine on a level oor.
• (For Adnity
TM
20 D, X 20 D, X 20 C, X 24 D) Turn the ignition key (80) to “0”.
(For Adnity
TM
17 ST, 20 ST) Turn off the switches (71) and (73).
Grasp the handle (41) and carefully lift the tank (40).
Check:
Tightening of mounting screws and nuts;
Correct position of fasteners;
Visible faults in the components;
Leaks of uids.
Carefully lower the tank (40).
Remove the machine from the hoisting system.
1.
2.
3.
•
4.
5.
•
•
•
•
6.
7.