Service manual

SERVICE MANUAL
ENGLISH
Adnity
TM
17 ST, 20 ST, 20 D, X 20 D, X 20 C, X 24 D 9096982000(1)2007-02
45
RECOVERY WATER SYSTEM
VACUUM SYSTEM MOTOR DISASSEMBLY/ASSEMBLY
Disassembly
If the tank (21) contains recovery water:
Drive the machine to the appointed recovery water disposal area.
(For
Adnity
TM
20 D - X 20 D - X 20 C - X 24 D) Turn the ignition key (80) to “0”.
(For Adnity
TM
17 ST - 20 ST) Turn off the switches (71) and (73).
Empty the recovery water tank (21) with the hose (16).
Drive the machine on a level oor.
• (For Adnity
TM
20 D - X 20 D - X 20 C - X 24 D) Turn the ignition key (80) to “0”.
(For
Adnity
TM
17 ST - 20 ST) Turn off the switches (71) and (73).
Disconnect the battery connector (12).
Grasp the handle (41) and carefully lift the tank (40).
Remove the screws (A) and recover the washers.
Remove the motor cover (B).
Remove the lter (C) and the gasket (D).
Remove the motor (E), the sound-deadening pipe (F) and the sound-deadening panel (G).
Disconnect the electrical connector (H) of the motor (E).
Check the efciency of the gasket (I) and, if necessary, replace it.
Assembly
Assemble the components in the reverse order of disassembly, and note the following:
If necessary, clean the lter (C) before assembling it (see the procedure in the relevant paragraph).
1.
•
•
•
•
2.
3.
•
4.
5.
6.
7.
8.
9.
10.
11.
12.
•
I
E
H
G
F
A
A
B
C
D
S301556A