Service manual

SERVICE MANUAL
ENGLISH
Adnity
TM
17 ST, 20 ST, 20 D, X 20 D, X 20 C, X 24 D 9096982000(1)2007-02
35
BRUSHING SYSTEM
BRUSH MOTOR DISASSEMBLY/ASSEMBLY (For Adnity
TM
17 ST - 20 ST - 20 D - X 20 D)
Disassembly
Remove the deck (see the procedure in the relevant paragraph).
At the workbench, remove the screw (A) from the deck.
Remove the hub assembly (B) with a puller.
Remove the screws (C).
Remove the reduction unit (D).
If necessary, remove the water distribution union (E) and ange (F) from the reduction unit.
Assembly
Assemble the components in the reverse order of disassembly.
1.
2.
3.
4.
5.
6.
7.
D
E
F
C
C
B
A
S301544A