Service manual
ENGLISH
SERVICE MANUAL
18
9096982000(1)2007-02 Adnity
TM
17 ST, 20 ST, 20 D, X 20 D, X 20 C, X 24 D
AXP
CLEAN WATER FILTER CLEANING (For Adnity
TM
X 20 D - X 20 C - X 24 D)
Drive the machine on a level oor.
Turn the ignition key (80) to “0”.
Open the cover (22) and check that the recovery water tank (21) is empty, otherwise empty it with the drain hose (16).
Grasp the handle (41) and carefully lift the tank (40).
Slightly lift the hoses (A), then, operating on the clean water lter assembly (F), unscrew the transparent cover (B) and
remove the lter strainer (C). Clean and install them on the support (D).
NOTE
The lter strainer (C) must be correctly positioned on the housing (E) of the support (D).
Install the hoses (A) and the lter assembly (F).
1.
2.
3.
4.
5.
6.
F
B
C
D
F
A
E
C
S301524A