operation manual

- 13 -
Congratulation with you new fireplace insert!
In order to get the best possible pleasure and benefit from your new Aduro fireplace insert, it is important that you
read this User Manual thoroughly before you install your fireplace insert and start to use it.
1.0 General
1.1 Compliance
Aduro 5-1 complies with the EN 13240 European standards, as well as the NS 3058 Norwegian standard and is
thereby approved for installation and use in Europe. At the same time, the manufacturing process is subject to
external quality control. The product documentation for Norway has Sintef number 110-0283 and can be
downloaded from our website at www.aduro.no or from www.nbl.sintef.no. Aduro 5-1 also carries the Nordic Swan
Ecolabel, which guarantees that the fireplace insert complies with the most stringent environmental requirements
and has been manufactured in an environmentally correct manner. DoP (Declaration of Performance) can be found
on www.aduro.dk.
1.2 Technical data
Nominal power
7 kW
Flue outlet, diameter
Ø150 mm top/rear
Measurements (HxBxD)
574 x 635 x 460 mm
Distance from centre of exhaust branch to
rear edge of fireplace
19 cm
Weight
77 kg
Material
Steel
Fuel
Wood and woodbriquettes
Max wood lenght
40 cm
Convection stove
Primary-, sekundary- og tertiary air supply
Air-wash system
Ashpan
Energy efficiency
77%
Chimney draught
12 Pa
Maximum combustion amount per hour:
- Wood approx.
ca. 3,4 kg
Heat rating in buildings with
- Optimum insulation
- Average insulation
- Inadequate insulation
175 m2
115 m2
70 m2
1.3 IMPORTANT: PRODUCTION NUMBER
The fireplace insert has a production number at the bottom of the rating plate on the back of the fireplace. Besides
this the number is also stamped inside at the bottom of the door. We recommend that you note down this number
before mounting the fireplace insert. For the purposes of the guarantee and for other enquiries, it is important that
you are able to quote this number.
P/ Nr.
English