Installation guide

ManualsBrandsADTRAN ManualsComputer equipmentVanta 1335

NetVanta 1335 Series Hardware Installation Guide Option Modules

NetVanta ADSL NIM, Annex A (P/N 1202869E1)

The NetVanta ADSL NIM, Annex A (see Figure 13) adds ADSL capability to the NetVanta. The module

provides a single ADSL, ADSL2, or ADSL2+ network interface to support rates up to 25 Mbps. Refer to

Appendix A on page 43 for WAN-ADSL and DBU connector pinouts. An optional DIM is required for dial

backup applications.

Figure 13. NetVanta ADSL NIM, Annex A

WAN-ADSL DBU

Features and Specifications

ADSL Interface

• ADSL over POTS, Annex A

• Supported Standards:

– ITU G.992.1 (G.dmt)

– ITU G.992.2 (G.lite)

– ITU G.992.3 ADSL2 (G.dmt.bis)

– ITU G.992.5 ADSL2+

– ANSI T1.413 Issue 2

– Reach Extended ADSL (READSL2)

• Connector: RJ-11C (6-pin jack, inner

pair)

ATM

• Multiple Protocol over AAL5

(RFC 2684)

• PPP over ATM (RFC 2364)

• PPP over Ethernet (RFC 2516)

• ATM Forum UNI 3.1/4.0 PVC

• ATM Class of Service (UBR)

• ATM F5 OAM

• Up to 16 Virtual Circuits

Compliance

• EMC - see Electromagnetic

Compatibility (EMC) Table on page 6.

• ACTA/FCC Part 68

• AS/ACIF S043

• AS/ACIF S002

• IC CS-03

• EN 60950

• IEC 60950

• UL/CUL 60950

• AS/NZS 60950

• RoHS compliant (Telecommunications

exemption)

Environmental

• Operating Temperature: 0°C to 50°C

• Storage Temperature: -20°C to 70°C

• Relative Humidity: Up to 95 percent,

noncondensing

Physical

• Dimensions: 2.75-inch W x 4.25-inch D