Installation guide

Option Modules NetVanta 1335 Series Hardware Installation Guide

NetVanta Serial NIM (P/N 1200866E1)

The NetVanta Serial NIM (see Figure 10) can be configured by the user as a V.35, X.21 (V.11), or EIA 530

interface. This module supports rates up to a maximum of 10 Mbps. An additional V.35 (ADTRAN

P/N 1200873L1), X.21 (ADTRAN P/N 1200874L1), or EIA 530 (ADTRAN P/N 1200883L1) cable is required

(refer to Caution, below). Refer to Appendix A on page 43 for serial connector and DBU connector pinouts. An

optional DIM is required for dial backup applications.

Figure 10. NetVanta Serial NIM

Cable length for the Serial NIM should not exceed 25 feet.

SERIAL DBU

Features and Specifications

Operating Mode

• DTE only

Serial Interface

• Supported Standards: ISO 4903 (X.21),

CCITT V.35 Synchronous (V.35),

EIA 530 Synchronous

• Provides V.35, X.21 (V.11), or EIA 530

electrical interface

• Connector: 26-pin smart serial (DTE)

Compliance

• EMC - see Electromagnetic

Compatibility (EMC) Table on page 6.

• ETSI TBR1

• ETSI TBR2

• EN 60950

• IEC 60950

• UL/CUL 60950

• AS/NZS 60950

• RoHS compliant (Telecommunications

exemption)

Environmental

• Operating Temperature: 0°C to 50°C

• Storage Temperature: -20°C to 70°C

• Relative Humidity: Up to 95 percent,

noncondensing

Physical

• Dimensions: 2.75-inch W x 4.25-inch D