Installation guide

Physical Description NetVanta 1335 Series Hardware Installation Guide

Table 1. Front Panel LED Descriptions

LED Color Indication

STAT

Off Unit is not receiving power.

Green (solid) Power is on and self-test passed.

Green (flashing) On power up, the STAT LED flashes rapidly for five

seconds, during which time the user may escape to boot

mode from the CONSOLE port.

Red (solid) Power is on, but the self-test failed or the boot code could

not be booted.

Port LEDs

(i.e., 1 through 24, G1,

G2, etc.)

Off Port is administratively disabled or does not have a

connection.

Green (solid) Port is enabled and has a connection.

Amber (flashing) Port has activity (transmit or receive).

DBU Off No DIM is installed.

Green (solid) DIM is ready. For the ISDN BRI DIM, green solid indicates

that the negotiation with the switch is complete.

Green (flashing) Unit is in dial backup.

Amber (solid) Unit is in test.

Red (solid) Alarm condition is occurring on the DBU interface, or there

is a self-test failure.

WAN Off No NIM is installed, or interface is administratively down.

Green (solid) NIM is up and everything is operational.

Green (flashing) Port has activity (transmit or receive).

Amber (solid) Unit is in test.

Red (solid) Alarm condition is occurring on the WAN interface, or there

is a self-test failure.

Power over Ethernet

Status LEDs

(PoE units only)

Green (solid) Power is being applied (48 V) to the interface.

Red (solid) Fault is detected on the interface.