Installation guide

Physical Description NetVanta 1335 Series Hardware Installation Guide

2. PHYSICAL DESCRIPTION

All NetVanta 1335 Series units are managed switches, plus multiservice routers housed in a 1U-high,

rack-mountable metal enclosure. The NetVanta 1335 Series front panels contain 24 10/100Base-T Ethernet

interfaces and two Gigabit Ethernet interfaces accessed via a fixed RJ-45 connector or small form-factor

pluggable (SFP) slots for fiber connectivity. All NetVanta 1335 Series units include IPsec virtual private network

(VPN) support (without further software upgrades) and expandable memory via CompactFlash. The NetVanta

1335 includes either a 120 VDC or 240 VDC power supply and the NetVanta 1335P includes an auto-ranging

AC power supply. All NetVanta 1335 Series units run the ADTRAN Operating System (AOS), and are

managed through an EIA-232

CONSOLE port (DB-9) located on the rear panel.

SFP Module Slots

The NetVanta 1335 Series supports two small SFP slots that accept a number of industry standard SFP modules.

The SFP modules provide Gigabit Ethernet fiber connectivity for high-speed uplinks or switch stacking. For a

list of supported SFP modules, visit the ADTRAN website at http://www.adtran.com

Option Modules

NetVanta 1335 Series units also contain one network interface module (NIM) slot on the rear panel to support

the following modules in data applications:

• 1200861L1 56K/64K NIM

• 1202862L1 T1/FT1 NIM

• 1202863L1 T1/FT1 + DSX-1 NIM

• 1200872L1/1202872L1 Dual T1 NIM

• 1200868E1/L1 E1/FE1 NIM

• 1200878E1/L1 E1/FE1 + G.703 Drop NIM

• 1200866E1 Serial NIM

• 1200936E1 SHDSL NIM, Annex A

• 1200937E1 SHDSL NIM, Annex B

• 1202869E1 ADSL NIM, Annex A

• 1202889E1 ADSL NIM, Annex B

• 1200864L1 Analog Modem DIM

• 1200865L1 ISDN BRI DIM

• 1200875L1 ISDN S/T DIM

Power over Ethernet

The NetVanta 1335 Series PoE devices provide the same basic functionality as the other NetVanta 1335 Series

products. PoE provides the ability to detect attached powered devices (PDs), and deliver 48 VDC to the PD via

existing cabling. The PoE devices are fully compliant with the IEEE 802.3af PoE standard. By default, the PoE

switches discover and provide power to IEEE-compliant PDs.

NetVanta 1335 Shipping Contents

Each NetVanta 1335 unit is shipped in its own cardboard shipping carton. Open each carton carefully, and avoid

deep penetration into the carton with sharp objects.