Installation guide

1. INTRODUCTION

The NetVanta 1335 Series includes the NetVanta 1335 and NetVanta 1335 Power over Ethernet (PoE).

This hardware installation guide lists the NetVanta 1335 Series units’ physical characteristics, product

specifications, introduces basic functionality, and provides installation instructions.

• Physical Description on page 16

• Product Specifications on page 20

• Option Modules on page 21

• Unit Installation on page 36

For additional information on mounting options, powering the unit, and installing option modules, refer to the

following sections:

• Mounting Options on page 37

• Supplying Power to the Unit on page 38

• Installing Dial Backup and Network Interface Modules on page 39

• Installing a CompactFlash Card on page 41

For information on switch configuration for a specific application, refer to the configuration guides provided on

the ADTRAN Support Community

. For details on the command line interface (CLI), refer to the AOS

Command Reference Guide. All other related documents are also available online at

http://supportforums.adtran.com

In this document, the term NetVanta means all NetVanta 1335 Series products. If a statement

only applies to one particular unit, the text refers to the unit individually. Additionally,

unless otherwise specified, descriptions for a NetVanta 1335 Series device also applies to

the PoE version of that device.