User Manual
Table Of Contents
- Table of Contents
- System Description
- Microwave Path Engineering Basics
- Engineering Guidelines
- Network Turnup Procedure
- User Interface Guide
- Troubleshooting Guide
Section 5 User Interface Guide TRACER 5045 System Manual
48 © 2003 ADTRAN, Inc. 612805045L1-1A
>ETHERNET SWITCH STATUS
Figure 5 shows the Ethernet Switch Status menu page, which displays transmit and receive data statistics
for the ethernet and WAN interfaces (from both the local and remote TRACER 5045 units).
Figure 6. TRACER Link Performance History
>ETHERNET SWITCH STATUS > TX PACKETS
Displays a counter of all data packets transmitted out the local and remote TRACER ethernet and WAN
(wireless link) interfaces. Use this data as an indicator for how many packets are being transmitted
between the four ethernet interfaces versus being transmitted over the wireless link.
>ETHERNET SWITCH STATUS > TX PACKETS DROPPED
Displays a counter of all transmit data packets that were unable to be transmitted out the individual
ethernet or WAN (wireless link) interfaces (for both the local and remote TRACER units). Use this data as
an indicator of congestion on the ethernet network segments.
>ETHERNET SWITCH STATUS > RX PACKETS
Displays a counter of all data packets received on the local and remote TRACER ethernet and WAN
(wireless link) interfaces. Use this data as an indicator for how many packets are being received on the four
ethernet interfaces versus being received over the wireless link.