User's Manual

Section 3 Engineering Guidelines TRACER 4208 System Manual
32 © 2003 ADTRAN, Inc. 612804208L1-1A
Antenna Interface (N-Type connector)
The ANTENNA interface (N-Type connector) connects to the customer-supplied antenna using standard
antenna feedline cable. When determining the cable specifications for your application, refer to Section 2,
Microwave Path Engineering Basics (System Losses (L) on page 18) for a discussion on cable length and
loss factors.
5. AT-A-GLANCE SPECIFICATIONS
The following is a list of specifications for the TRACER 4208 system.
Table 9. At-A-Glance Specifications
Hardware Description Specification
Transmitter
Output Power +20 dBm, max
Frequency Range 5725 to 5850 MHz
Receiver
Receive Level, Minimum -86 dBm
Receive Level, Maximum -30 dBm
Receive Level, Nominal -55 dBm
Frequency Plan
Plan A
Band Plan
1 Tx 5.742 GHz, Rx 5.815 GHz
2 Tx 5.747 GHz, Rx 5.827 GHz
3 Tx 5.753 GHz, Rx 5.833 GHz
Plan B
Band Plan
1 Tx 5.815 GHz, Rx 5.742 GHz
2 Tx 5.827 GHz, Rx 5.747 GHz
3 Tx 5.833 GHz, Rx 5.753 GHz
T1 Interface
Capacity 1.544 Mbps (each)
Connection RJ-48C jacks
Line Code B8ZS, AMI
Framing ESF, D4
Alarms AIS, Red, Yellow, BPVs, LOS
Loopbacks Local and remote (line and link)