User Manual
Table Of Contents
- Table of Contents
- System Description
- Microwave Path Engineering Basics
- Engineering Guidelines
- Network Turnup Procedure
- User Interface Guide
- Troubleshooting Guide
Section 5 User Interface Guide TRACER 4208 System Manual
52 © 2003 ADTRAN, Inc. 612804208L1-1A
>T1X STATUS/CONFIGURATION/LOOPBACK > LOOP/NORMAL STATE > LINK
Activates a loopback at the TRACER 4208 T1 framer towards the wireless link (see Figure 8). Use the
LINK loopback to test data path integrity from one unit across the wireless link.
Figure 8. T1 Link Loopback
>T1X STATUS/CONFIGURATION/LOOPBACK > LOOP/NORMAL STATE > LINE
Activates a loopback at the TRACER 4208 T1 framer towards the locally connected T1 equipment (see
Figure 9). Use the
LINE loopback to test data path integrity from the TRACER 4208 unit to the T1
equipment.
Figure 9. T1 Line Loopback
>T1X PERFORMANCE HISTORY
Figure 10 shows the T1x Performance History menu page, which displays detailed error statistics for the
T1 link (from both the local and remote TRACER 4208 units) in 15-minute increments.
Figure 10. T1x Link Performance History
24
Hours
7
Days