User Manual
Table Of Contents
- System Description
- Microwave Path Engineering Basics
- Engineering Guidelines
- Network Turnup Procedure
- User Interface Guide
- 1. Navigating the Terminal Menu
- 2. Terminal Menu and System Control
- 3. Menu Descriptions
- >TRACER System Status
- >Main Menu
- >TRACER System Configuration
- >TRACER Link Performance History
- >T1A Status/Configuration/Loopback
- >T1A Performance History
- >T1B Status/Configuration/Loopback
- >T1B Performance History
- >T1C Status/Configuration/Loopback
- >T1C Performance History
- >T1D Status/Configuration/Loopback
- >T1D Performance History
- Troubleshooting Guide
Section 6, Troubleshooting Guide TRACER 4206 System Manual
66 © 2002 ADTRAN, Inc. 612804206L1-1A
Installing/Configuring T1 Hardware
1. If possible, attach any or all of the intended T1 hardware to the TRACER 4206 units using the
same work bench setup. This step offers the perfect opportunity to configure your T1 hardware for
proper functioning with the TRACER hardware.
2. Resolve any remaining T1 equipment-to-TRACER 4206 configuration issues before field
installation, if possible. This will significantly reduce the probability of unsuccessful field
installation.