User Manual
Table Of Contents
- System Description
- Microwave Path Engineering Basics
- Engineering Guidelines
- Network Turnup Procedure
- User Interface Guide
- 1. Navigating the Terminal Menu
- 2. Terminal Menu and System Control
- 3. Menu Descriptions
- >TRACER System Status
- >Main Menu
- >TRACER System Configuration
- >TRACER Link Performance History
- >T1A Status/Configuration/Loopback
- >T1A Performance History
- >T1B Status/Configuration/Loopback
- >T1B Performance History
- >T1C Status/Configuration/Loopback
- >T1C Performance History
- >T1D Status/Configuration/Loopback
- >T1D Performance History
- Troubleshooting Guide
Section 5, User Interface Guide TRACER 4206 System Manual
58 © 2002 ADTRAN, Inc. 612804206L1-1A
>T1D STATUS/CONFIGURATION/LOOPBACK
Figure 19 shows the T1D Status/Configuration/Loopback menu page. Real-time graphical representation
for the T1D link (using data from both the local and remote TRACER 4206 units) is displayed on this
page. T1D operational configuration parameters and testing functions are configured from this menu.
Figure 19. T1D Status/Configuration/Loopback
>T1D STATUS/CONFIGURATION/LOOPBACK > T1D INTERFACE ALARMS
Displays and active alarms on the T1D link reported from both the local and remote TRACER 4206 units.
These alarms include Red, Blue, Yellow, AIS, and bipolar violations (BPV). See Table 1 on page 50, for
more information on these alarms.
Press <N> to view the next 8 hours worth of 15 minute totals and <P> to view the
previous 8 hours.
Press <6> from any menu in the TRACER 4206 VT100 menu structure to access the T1C
Link Performance History page.
Press <7> from any menu in the TRACER 4206 VT100 menu structure to access the T1D
Status/Configuration/Loopback menu page.