User Manual
Table Of Contents
- System Description
- Microwave Path Engineering Basics
- Engineering Guidelines
- Network Turnup Procedure
- User Interface Guide
- 1. Navigating the Terminal Menu
- 2. Terminal Menu and System Control
- 3. Menu Descriptions
- >TRACER System Status
- >Main Menu
- >TRACER System Configuration
- >TRACER Link Performance History
- >T1A Status/Configuration/Loopback
- >T1A Performance History
- >T1B Status/Configuration/Loopback
- >T1B Performance History
- >T1C Status/Configuration/Loopback
- >T1C Performance History
- >T1D Status/Configuration/Loopback
- >T1D Performance History
- Troubleshooting Guide
TRACER 4206 System Manual Section 5, User Interface Guide
612804206L1-1A © 2002 ADTRAN, Inc. 51
>T1A STATUS/CONFIGURATION/LOOPBACK > LOOP/NORMAL STATE > LINK
Activates a loopback at the TRACER 4206 T1A framer towards the wireless link (see Figure 8). Use the
LINK loopback to test data path integrity from one unit across the wireless link.
Figure 8. T1A Link Loopback
>T1A STATUS/CONFIGURATION/LOOPBACK > LOOP/NORMAL STATE > LINE
Activates a loopback at the TRACER 4206 T1A framer towards the locally connected T1A equipment (see
Figure 9). Use the
LINE loopback to test data path integrity from the TRACER 4206 unit to the T1A
equipment.
Figure 9. T1A Line Loopback
>T1A PERFORMANCE HISTORY
Figure 10 shows the T1A Performance History menu page. The T1A Performance History menu page
displays detailed error statistics for the T1A link (from both the local and remote TRACER 4206 units) in
15-minute increments.
Figure 10. T1A Link Performance History