User Manual
Table Of Contents
- System Description
- Microwave Path Engineering Basics
- Engineering Guidelines
- Network Turnup Procedure
- User Interface Guide
- 1. Navigating the Terminal Menu
- 2. Terminal Menu and System Control
- 3. Menu Descriptions
- >TRACER System Status
- >Main Menu
- >TRACER System Configuration
- >TRACER Link Performance History
- >T1A Status/Configuration/Loopback
- >T1A Performance History
- >T1B Status/Configuration/Loopback
- >T1B Performance History
- >T1C Status/Configuration/Loopback
- >T1C Performance History
- >T1D Status/Configuration/Loopback
- >T1D Performance History
- Troubleshooting Guide
TRACER 4206 System Manual Section 5, User Interface Guide
612804206L1-1A © 2002 ADTRAN, Inc. 49
The minimum received signal level (MIN RSL) is represented as a numerical value from 0 to 255 with 0
corresponding to no receive power and 255 corresponding to an extremely hot signal. The minimum
received signal level is directly related to RSSI.
The error count and received signal level for the most recent 24 hours are recorded and displayed on the
right side of the page. The left side of the page displays the 24 hour totals for the most recent 7 days.
>T1A STATUS/CONFIGURATION/LOOPBACK
Figure 7 shows the T1A Status/Configuration/Loopback menu page. Real-time graphical representation
for the T1A link (using data from both the local and remote TRACER 4206 units) is displayed on this
page. T1A operational configuration parameters and testing functions are configured from this menu.
Figure 7. T1A Status/Configuration/Loopback
Press <N> to view the next 8 hours worth of 15-minute totals and <P> to view the
previous 8 hours.
Press <L> from any menu in the TRACER 4206 VT100 menu structure to access the
TRACER Link Performance History menu page.
Press <1> from any menu in the TRACER 4206 VT100 menu structure to access the
T1A Status/Configuration/Loopback menu page.