User Manual
Table Of Contents
- System Description
- Microwave Path Engineering Basics
- Engineering Guidelines
- Network Turnup Procedure
- User Interface Guide
- 1. Navigating the Terminal Menu
- 2. Terminal Menu and System Control
- 3. Menu Descriptions
- >TRACER System Status
- >Main Menu
- >TRACER System Configuration
- >TRACER Link Performance History
- >T1A Status/Configuration/Loopback
- >T1A Performance History
- >T1B Status/Configuration/Loopback
- >T1B Performance History
- >T1C Status/Configuration/Loopback
- >T1C Performance History
- >T1D Status/Configuration/Loopback
- >T1D Performance History
- Troubleshooting Guide
Section 5, User Interface Guide TRACER 4206 System Manual
42 © 2002 ADTRAN, Inc. 612804206L1-1A
Navigating using the Keyboard Keys
You can use various keystrokes to move through the terminal menu, to manage a terminal menu session,
and to configure the system.
Moving through the Menus
Session Management Keystrokes
2. TERMINAL MENU AND SYSTEM CONTROL
Password Protection
The TRACER 4206 provides optional password protection of the terminal interface. If enabled, a password
prompt is presented at power-up, reboot, modem logout, or after ten minutes of inactivity on the terminal.
Password protection is enabled and a password is defined via the system configuration menu.
To do this... Press this key...
Move up to select items Up Arrow
Move down to select items Down Arrow
Edit a selected menu item Enter
Scroll through configuration parameters for a menu item Spacebar
Left/Right Arrows
P or N (Prev/Next)
Cancel an edit Escape
Return to Main Menu page M
To do this... Press this key...
Log into a session Spacebar
Refresh the screen
To save time, only the portion of the screen that has changed is refreshed.
<Ctrl + L>
All TRACER 4206 systems are shipped factory default with password protection disabled.