User Manual
Table Of Contents
- System Description
- Microwave Path Engineering Basics
- Engineering Guidelines
- Network Turnup Procedure
- User Interface Guide
- 1. Navigating the Terminal Menu
- 2. Terminal Menu and System Control
- 3. Menu Descriptions
- >TRACER System Status
- >Main Menu
- >TRACER System Configuration
- >TRACER Link Performance History
- >T1A Status/Configuration/Loopback
- >T1A Performance History
- >T1B Status/Configuration/Loopback
- >T1B Performance History
- >T1C Status/Configuration/Loopback
- >T1C Performance History
- >T1D Status/Configuration/Loopback
- >T1D Performance History
- Troubleshooting Guide
TRACER 4206 System Manual Section 3, Engineering Guidelines
612804206L1-1A © 2002 ADTRAN, Inc. 31
Frequency Plan (continued)
Plan B
Band Plan
1 Tx 5.814 GHz, Rx 5.734 GHz
2 Tx 5.824 GHz, Rx 5.744 GHz
3 Tx 5.833 GHz, Rx 5.753 GHz
T1 Interface
Capacity 1.544 Mbps (each)
Connection RJ-48C jacks
Line Code B8ZS, AMI
Framing ESF, D4
Alarms AIS, Red, Yellow, BPVs, LOS
Loopbacks Local and remote (line and link)
User Interface
Panel Alarm LEDs
Diagnostics Line and Link Loopbacks
Test Points QPSK Constellation, RSSI, Tx PWR
Alarms Normally Open (NO) and Normally
Closed (NC)
VT100 Terminal Menu Driven User Interface, Control of
the Remote End, Loopback Test,
Optional Password Protection, Event
History
VT100 Terminal Interface
Data Rate 9600 bps
Data Bits 8
Parity None
Stop Bits 1
Terminal Emulation VT100
Mechanical and Environmental
Operating Temperature -25ºC to 65ºC
Size 19” W x 10.5” D x 1.75” H
Humidity 95%, Non-condensing
Hardware Description Specification