User Manual
Table Of Contents
- Trademarks
- About this Manual
- Federal Communications Commission Radio Frequency Interference Statement
- Warranty and Customer Service
- Customer Service, Product Support Information, and Training
- 4205 System Description
- Microwave Path Engineering Basics
- Engineering Guidelines
- Network Turnup Procedure
- User Interface Guide
- Troubleshooting Guide
TRACER 4205 System Manual Section 3, Engineering Guidelines
612804205L1-1A © 2002 ADTRAN, Inc. 31
5. AT-A-GLANCE SPECIFICATIONS
The following is a list of specifications for the TRACER 4205 system.
Hardware Description Specification
Transmitter
Output Power +20 dBm, max
Frequency Range 5725 to 5850 MHz
Receiver
Receive Level, Range -30 to -78 dBm
Receive Level, Maximum -30 dBm
Receive Level, Nominal -50 dBm
Frequency Plan
Plan A Tx 5.747 GHz, Rx 5.800 GHz
Plan B Tx 5.827 GHz, Rx 5.750 GHz
DS3 Interface
Capacity 44.736 Mbps
Connection dual 75 Ω BNC connectors (Tx and Rx)
Line Code B3ZS
Framing M13, C-Bit Parity
Alarms AIS, Red, Yellow, BPVs
Loopbacks Local and remote (line and link)
User Interface
Diagnostics DS3 Line and Link Loopbacks
Test Points RSSI, Tx PWR
VT100 Terminal Interface
Data Rate 9600 bps
Data Bits 8
Parity None
Stop Bits 1
Terminal Emulation VT100