User Manual

TRACER 4102/4202 System Manual Section 5 User Interface Guide
612804202L1-1A © 2004 ADTRAN, Inc. 47
>TRACER SYSTEM OPTIONS
Figure 4 shows the TRACER 4102/4202 System Options menu page. System option parameters for both the
local and remote TRACER 4102/4202 units are available through this menu page.
Figure 4. TRACER 4102/4202 System Options
>TRACER SYSTEM OPTIONS > RX POWER
Displays the approximate receiver levels (for both the local and remote units) using a series of symbols (#).
The more symbols (
#) displayed, the stronger the signal. If the link is down in either direction and remote
end data is unavailable,
DATA NOT AVAILABLE displays in place of the symbols (#). This parameter is display
only.
>TRACER SYSTEM OPTIONS > TX POWER
Allows the transmitter levels (for both the local and remote units) to be adjusted. The current transmitter
level is displayed using a series of symbols (
#). The more symbols (#) displayed, the stronger the signal. If
the link is down in either direction and remote end data is unavailable,
DATA NOT AVAILABLE displays in
place of the symbols (
#).
>TRACER SYSTEM OPTIONS > SITE NAME
Provides a user-defined alphanumeric description (up to 25 characters) for the TRACER 4102/4202 system.
Press <O> from any menu in the TRACER 4102/4202 VT100 menu structure to access the
TRACER System Options menu page.
Reducing the transmitter power of the remote TRACER 4102/4202 could cause the RF link
to drop, requiring a technician to manually increase transmit power through the menu
system at the remote site.