User Manual
Table Of Contents
- Table of Contents
- System Description
- Microwave Path Engineering Basics
- Engineering Guidelines
- Network Turnup Procedure
- User Interface Guide
- Troubleshooting Guide
TRACER 4102/4202 System Manual Section 4 Network Turnup Procedure
612804202L1-1A © 2004 ADTRAN, Inc. 37
Customer Provides
The following items are necessary for the installation of the TRACER 4102/4202 system and are not
provided by ADTRAN:
• 21 to 60 VDC power source (or AC adapter available from ADTRAN P/N 1280650L1), either polarity
referenced to ground
• Antenna and mounting hardware
• Antenna feedline cable
• Lightning arrestors
• Weatherproofing kits for antenna installation
4. CHANNEL SELECTION
The FCC has allocated 83.5 MHz of spectrum in the 2.4 GHz band where the TRACER 4102 operates, and
125 MHz of spectrum in the 5.8 GHz band where the TRACER 4202 operates. Figure 1 and Figure 2
illustrate the bandwidth division.
Figure 1. 2.4 GHz Bandwidth Division (TRACER 4102)
Figure 2. 5.8 GHz Bandwidth Division (TRACER 4202)
Channel!A
2416 2441.752422 24282400 MHz 2483.5! MHz
Bandplan!3
Bandplan!2
Bandplan!1
Channel!B
2456 2462 2468
Bandplan!3
Bandplan!2
Bandplan!1
Channel!A
57345725 5787 58505744 5753MHz MHz
Bandplan!3Bandplan!2Bandplan!1
Channel!B
5814 5824 5833
Bandplan!3Bandplan!2Bandplan!1