User's Manual
Table Of Contents
- Table of Contents
- System Description
- Microwave Path Engineering Basics
- Engineering Guidelines
- Network Turnup Procedure
- User Interface Guide
- Troubleshooting Guide
TRACER 4108/4208 System Manual Section 5 User Interface Guide
612804208L1-1B © 2003 ADTRAN, Inc. 53
>T1X STATUS/CONFIGURATION/LOOPBACK > LOOP/NORMAL STATE > LINE
Activates a loopback at the TRACER 4108/4208 T1 framer towards the locally connected T1 equipment
(see Figure 11). Use the
LINE loopback to test data path integrity from the TRACER 4108/4208 unit to the
T1 equipment.
Figure 11. T1 Line Loopback
>T1X STATUS/CONFIGURATION/LOOPBACK > LOOP/NORMAL STATE > LINE (REMOTE)
Activates a loopback at the remote TRACER 4108/4208 T1 framer towards the locally connected T1
equipment (see Figure 11). Use the
LINE loopback to test data path integrity from the TRACER 4108/4208
unit to the T1 equipment.
Figure 12. T1 Remote Line Loopback
>T1X PERFORMANCE HISTORY
Figure 13 shows the T1x Performance History menu page, which displays detailed error statistics for the
T1 link (from both the local and remote TRACER 4108/4208 units) in 15-minute increments.
Figure 13. T1x Link Performance History
The following menus for the T1x Performance History apply to all eight available T1
interfaces (A through H).
24
Hours
7
Days