User's Manual

61280.003L1-1B PAGE 17

4/12/99

UNPACK, INSPECT

Carefully inspect the Tracer for any shipping damages. If damage

is suspected, file a claim immediately with the carrier then contact

ADTRAN Customer Service. If possible, keep the original shipping

container for use in shipping the Tracer back for repair or for

verification of damage during shipment.

Before beginning installation, verify that all of the following

components are present.

RACK-MOUNTED RFC CONFIGURATION:

Provided by ADTRAN --

• Baseband processor

• Rack-mounted RFC

• BBP to RFC IF interconnect cable

• DS1/DSX-1 interface cables (RJ-48 to RJ-48)

Provided by customer --

• Antenna feedline cable

• Antenna and mounting hardware

• VT-100 terminal and RS-232 interface cable (optional)

• 21 to 56 volt DC power source (available from ADTRAN), either

polarity referenced to ground

MAST-MOUNTED RFC CONFIGURATION: