User guide

Ethernet RFC 2544 Test
72 AXS-200/805/855
Global Configuration
If User Defined is selected, the following frame sizes are available for
IPv4 version:
If User Defined is selected, the following frame sizes are available for
IPv6 version:
If User Defined is selected, use Up or Down arrow, or button to
traverse the fields and enter the Frame Size. Press the Apply Changes
button to apply changes.
³ Throughput: Enable or disable Throughput subtest.
³ Back-to-Back: Enable or disable Back-to-Back subtest.
³ Frame Loss: Enable or disable Frame Loss subtest.
³ Latency: Enable or disable Latency subtest.
Note: All subtests are enabled by default.
³ Pass/Fail Verdict: Enable or disable the Pass/Fail Verdict. Choices are
Enabled and Disabled. The default setting is Enabled. If enabled, the
Pass/Fail Verdict displays the Pass/Fail verdict on the result pages.
Frame Type VLAN Configuration Frame size (Bytes)
User Defined No VLAN 64 to 9600
One VLAN 68 to 9600
Two VLAN 72 to 9600
Frame Type VLAN Configuration Frame size (Bytes)
User Defined No VLAN 70 to 9600
One VLAN 74 to 9600
Two VLAN 78 to 9600