User guide

Ethernet Test Setup

64 AXS-200/805/855

Module

Press , select ETHERNET, Setup, and the Module tab.

The Module page allows configuration

of the following parameters:

³ Module ID: The Module ID is used

to easily identify the unit when

auto-discovered in a network. Up

to 16 alpha-numeric characters are

supported.

³ Default Configuration: Select the

Restore button to restore the

default settings of the module.

³ Restore Default at Start-Up: Enable or disable the module’s

configuration to be restored upon start-up. If enabled, the user will be

prompted at start-up if the default settings should be restored.