User guide

Ethernet Test Setup
Multi Protocol Test Set 57
SFP
SFP
The optical interface on the module is made available via a Small Form
Factor Pluggable Module (SFP). For a list of supported SFPs, refer to Optical
Transceivers (SFP) on page 6.
Press , select ETHERNET, Setup, Interface, and the SFP tab.
The following information is displayed
on the SFP page.
³ Module ID
³ Vendor Name
³ Part Number
³ Serial Number
³ Connector Type: LC, MT-RJ, etc.
³ Speed: 100Base-FX, 1000Base-SX, etc.
Note: Ensure that the speed selected corresponds to the speed of the SFP
installed.
³ Type: Reach type: SR, IR, LR, etc.
³ Wavelength: 850 nm, 1310 nm, 1550 nm.
³ Mode: Single Mode Fiber (SMF) or Multi-Mode Fiber (MMF).