User guide

Ethernet Test Setup

54 AXS-200/805/855

Default Gateway

The Default Gateway tab allows the configuration of the default gateway

address to forward packets outside the subnet.

Press , select ETHERNET, Setup, Interface, and the Default Gateway

tab.

Note: The Default Gateway tab is only available when IPv6 version is selected.

See IP Version on page 49 to select IPv6 version. When IPv4 is selected, the

default gateway can be configured in the Network tab.

³ Mode

³ Automatic allows automatic

selection of the default

gateway. The default setting is

Automatic.

³ Static allows entering the

default gateway IP address.

³ Address: If the Mode is Static,

enter the IP address of the Default Gateway. The accepted range is

from FE80:0000:0000:0000:0000:0000:0000:0000 to

FE80:0000:0000:0000:FFFF:FFFF:FFFF:FFFF. The default address is

FE80:0000:0000:0000:0000:0000:0000:0000. When the Mode is

Automatic, the address field is not configurable.