User guide

Multi Protocol Test Set 45
7 Ethernet Test Setup
The Setup menu is used to configure the test interface for the AXS-200/855
before it can be used for testing. The Setup menu offers the following
structure:
f
Interface
The Interface is used to configure the local test interface. The required
parameters correspond to the physical, data link, and network layers. The
parameters are globally configured and applied to all the tests and tools.
Ensure that these parameters are set before running any tests or tools.
Configuring the interface includes configuring the port, network, and VLAN
settings as described in the following procedures.
Submenu Tab/Page Page
Interface Port 46
Network 49
Default Gateway
a
a. The Default Gateway tab is only available when the selected IP version is IPv6.
54
VLAN 56
SFP 57
Remote Manual Selection 61
Discovery 58
Module Module 64
Save & Load
Config
Save & Load Config 65