User guide

Configuring and Starting an Ethernet Test or Tool
42 AXS-200/805/855
Configuring a Traffic Generation & Monitoring Test
To configure the Traffic Generation & Monitoring Test
(Background Streams Config):
1. Press , select ETHERNET, Traffic Generation & Monitoring,
Background Stream Config, and the Transmit tab.
2. Configure the transmit settings by referring to Transmit Configuration
on page 148.
3. Select the Stream tab and configure the stream settings by referring to
Stream Configuration on page 150.
4. Select the Network tab and configure the network settings by referring
to Network Configuration on page 155.
5. Select the VLAN tab and configure the VLAN settings by referring to
VLAN Configuration on page 161.