User guide

Multi Protocol Test Set 15
4 Signal Connection and LEDs
This section describes all connectors (ports) and LEDs available on the
AXS-200/855 and AXS-200/850.
AXS-200/855 Model
Note: An SFP can be replaced at any time. If an SFP is changed while the optical
interface is selected and active, the laser will remain on automatically. Use
caution when installing the SFP in case the laser is enabled.
AXS-200/805 Model
DS3 Port
PRI or DUAL DS1/E1 Port
Ta lk - Se t Po rt
10/100/1000 Mbps
electrical
100/1000 Mbps optical SFP with
Dual or Simplex LC connector
DS3 Port
PRI or DUAL DS1/E1 Port
Ta lk - Se t Po rt