User guide

Multi Protocol Test Set 257
18 Report
The Report menu allows you to configure reports and helps viewing the
Ethernet or DSn/PDH test reports.
Report Configuration
The configurable parameters appear on the top of the report page.
Press , select Report, and the Configuration page.
³ Report Header: Enter the Report
header information. The header
can be the company name for
example, and must be less than
30 characters long.
³ Report Title: Enter the report title
which must be less than 30
characters long. This can be the
name of the product, name of
test, or test number for example.
³ User Information: Enter any additional information of up to 30
characters.
³ Report Prompt: When enabled, a prompt will pop up every time a test
case is stopped or completed to ask the user if a report generation is
desired.
³ Media Selector: Allows the selection of the media where the report
files will be saved. Choices are Internal Flash Memory or USB key.
The default media is Internal Flash Memory.
When Internal Flash Memory is selected, the report file will be saved
to the \Data\My Documents\NetBlazer850\Reports folder.
When USB key is selected, the report file will be saved on an USB
memory media. However, if no USB key is not present, the user will be
prompted to save the report to the internal flash.