User guide

DS3 Test
250 AXS-200/805/855
Facility Results
³ Signal and RTD
Allows to either displays the signal, slips, or Round Trip Delay (RTD)
status.
³ Signal status displays the received signal frequency (Hz) and it
level (dBdsx and Vpp). If no signal is received, NO SIGNAL is
displayed.
³ RTD displays the measured round trip delay in ms. RTD is not
available with Monitor test mode.
³ Report: Select the Report button to generate a report for the test. Refer
to Report Generation on page 91 to generate and save a report file.