User guide

E1-A and E1-B Tests
Multi Protocol Test Set 241
Freq. Analyzer Results
Freq. Analyzer Results
Freq. Analyzer is only available on port E1-A.
Press , select DSn/PDH, E1-A, Results and the Freq. Analyzer tab.
³ E0 PCM allows to enable (ON) or
disable (OFF) the E0 channel
PCM decoding that gives the
received signal frequency and
level.
³ E0 Channel allows to select the
E0 channel for which the
decoded channel and PCM
content will be displayed.
³ Test Time displays the time elapsed since the beginning of the test. The
time is reset when using the CLEAR button (see Facility Results on
page 236).
³ Channel Content displays the data that is being transmitted (TX) and
received (RX) in binary and hexadecimal formats for the selected E0
channel.
³ Received FREQ displays the received signal frequency in Hz for the
selected E0 channel if the E0 PCM ON/OFF is enabled.
³ Received LEVEL displays the received signal level in dBm for the
selected E0 channel if the E0 PCM ON/OFF is enabled.