User guide

Ethernet Tools
Multi Protocol Test Set 211
Cable Test Results - Delay/Length
Cable Test Results - Delay/Length
The cable test result Delay/Length tab gives the propagation delay and
cable length for each pair. The Pass/Fail verdict is also displayed for
propagation delay and cable length (when enabled).
Note: Cable test is only available when the Transceiver Mode is set to Electrical
(Refer to Port on page 46).
Press , select ETHERNET, Tools, Results, and the Delay/Length tab.
³ Pair: Indicates the pair number.
³ Pins: Indicates the pair’s pin
numbers and color of each wire
corresponding to the selected
wiring standard (see page 203).
W-BL =White-Blue
BL =Blue
W-O = White-Orange
O =Orange
W-G =White-Green
G =Green
W-BR =White-Brown
BR =Brown