User guide

Ethernet Tools
Multi Protocol Test Set 207
Cable Test Results - Wire Map
Cable Test Results - Wire Map
The cable test result Wire Map tab gives the cable pinout, and connectivity
errors for each pair. The fault distance is also displayed when a fault is
identified. The Pass/Fail verdict is also displayed when enabled.
Note: Cable test is only available when the Transceiver Mode is set to Electrical
(Refer to Port on page 46).
Press , select ETHERNET, Tools, Results, and the Wire Map tab.
³ Pair: Indicates the pair number.
³ Pins: Indicates the pair’s pin
numbers and color of each wire
corresponding to the selected
wiring standard (see page 203).
W-BL =White-Blue
BL =Blue
W-O = White-Orange
O =Orange
W-G =White-Green
G =Green
W-BR =White-Brown
BR =Brown