User guide

Ethernet Traffic Generation & Monitoring Test

Multi Protocol Test Set 159

Default Gateway

The Default Gateway tab allows the configuration of the default gateway

address to forward packets outside the subnet.

Press , select ETHERNET, Traffic Generation & Monitoring,

Background Stream Config, and the Default Gateway tab.

Note: The Default Gateway tab is only available when the selected IP version is

IPv6. See IP Version on page 49 to select IPv6 version

³ Background Stream: Select any

of the three background streams

for which the network

parameters are to be configured.

³ Mode:

Automatic allows automatic

selection of the default

gateway. The default setting

is Automatic.

Static allows entering the default gateway IP address.

³ Address: If the Mode is Static, enter the IP address of the Default

Gateway. The accepted range is from

FE80:0000:0000:0000:0000:0000:0000:0000 to

FE80:0000:0000:0000:FFFF:FFFF:FFFF:FFFF. The default address

is FE80:0000:0000:0000:0000:0000:0000:0000. When the Mode

is Automatic, the address field is not configurable.