User guide

Ethernet Traffic Generation & Monitoring Test

144 AXS-200/805/855

Jitter/Latency Configuration

Press , select ETHERNET, Traffic Generation & Monitoring, Stream

Config, and the Jitter/Latency tab.

Jitter Configuration

³ Jitter: The Jitter parameter allows to enable or disable the Jitter

proprietary information insertion in the payload and offers a

pre-defined selection of profiles.

The following pre-defined profiles are available when frame structure

Ethernet/IPv4/UDP or Ethernet/IPv6/UDP is selected. See Framing on

page 133.

³ VoIP G.711

³ VoIP G.723.1

³ VoIP G.729

³ IPTV SDTV (MPEG-2)

³ IPTV HDTV (MPEG-2)

³ IPTV HDTV (MPEG-4)

³ User defined

³ Disabled