User guide

Ethernet BERT Test

Multi Protocol Test Set 115

Stream Configuration

³ TOS/DS for IPv4 and Traffic Class (TOS/DS) for IPv6

Select Type of Service (TOS) or Differentiated Services (DS).

Note: It is possible to configure the TOS/DS parameter using either the

hexadecimal code (00 to FF) or TOS/DS using binary code.

³ If TOS is selected, go to the next field to

enter the hexadecimal code 00 to FF or

go to the field underneath to enter the

binary code.

The possible values are shown as follows:

Parameter Value Bit

Precedence 000 (Routine), 001 (Priority), 010 (Immediate),

011 (Flash), 100 (Flash Override),

101 (CRITIC/ECP), 110 (Internet Control),

111 (Network Control)

Default: 000 (Routine)

1-3

Throughput Normal / High (0/1)

Default: Normal

Monetary Cost Normal / Low (0/1)

Default: Normal

Delay Normal / Low (0/1)

Default: Normal

Reliability Normal / High (0/1)

Default: Normal

Reserved bit 0 or 1

Default: 0