User guide

Ethernet RFC 2544 Test
98 AXS-200/805/855
Frame Loss Results
Frame Loss Results
Press , select ETHERNET, RFC 2544, Results, and the Frame Loss tab.
³ Status: Displays the test status as
“--”, In Progress, Completed, or
Aborted. Once the Frame Loss test
is completed or stopped, the
Pass/Fail verdict is displayed,
when enabled.
³ Max. Rate: Displays the configured
value of maximum rate in Mbps or
%.
Note: Max. Rate will be displayed only when the Dual Test Set parameter is set
to Disabled in Global Configuration on page 70.
³ Duration: Displays the test duration in D HH:MM:SS format.
³ Threshold: The frame loss Pass/Fail threshold can be configured in
percentage at all times. When the value is changed, the verdict of the
subtest gets re-evaluated and updated.
Note: Threshold will not be displayed when the Dual Test Set parameter is set to
Local in Global Configuration on page 70.