User guide

Table 3: T1 or E1 show interfaces Output Fields (continued)

Level of OutputField DescriptionField Name

detail extensive none(Frame Relay) Settings for Local Management Interface (LMI) which can be

either ANSI LMI settings or ITU LMI settings. ANSI LMI settings is the default.

The format is (ANSI or ITU) LMI settings: value, value... xx seconds, where value

can be:

• n391dte—DTE full status polling interval (1–255)

• n392dce—DCE error threshold (1–10)

• n392dte—DTE error threshold (1–10)

• n393dce—DCE monitored event count (1–10)

• n393dte—DTE monitored event count (1–10)

• t391dte—DTE polling timer (5–30 seconds)

• t392dce—DCE polling verification timer (5–30 seconds)

LMI settings

detail extensive none(Frame Relay) Local Management Interface (LMI) packet statistics:

• Input—Number of packets coming in on the interface (nn) and how much

time has passed since the last packet arrived. The format is Input: nn (last

seen hh:mm:ss ago).

• Output—Number of packets sent out on the interface (nn) and how much

time has passed since the last packet was sent. The format is Output: nn (last

sent hh:mm:ss ago).

LMI

detail extensive none(Frame Relay) Statistics about messages transmitted from the data terminal

equipment (DTE) to the data communications equipment (DCE):

• Enquiries sent—Number of link status enquiries sent from the DTE to the DCE.

• Full enquiries sent—Number of full enquiries sent from the DTE to the DCE.

• Enquiry responses received—Number of enquiry responses received by the

DTE from the DCE.

• Full enquiry responses received—Number of full enquiry responses sent from

the DTE to the DCE.

DTE statistics

detail extensive none(Frame Relay) Statistics about messages transmitted from the DCE to the DTE:

• Enquiries received—Number of enquiries received by the DCE from the DTE.

• Full enquiries received—Number of full enquiries received by the DCE from

the DTE.

• Enquiry responses sent—Number of enquiry responses sent from the DCE to

the DTE.

• Full enquiry responses sent—Number of full enquiry responses sent from the

DCE to the DTE.

DCE statistics

E1 Interfaces Feature Guide for Routing Devices