User guide

ManualsBrandsADTRAN ManualsComputer equipmentTracer TRACER 2 x E1

Table 3: T1 or E1 show interfaces Output Fields (continued)

Level of OutputField DescriptionField Name

detail extensive noneIMA Link Media Status, which provides the seconds and count state for the

following link media parameters:

• LIF

• LODS

• Err-ICP

• IV

• Rx-FC

• Tx-FC

• FE-Defects

• FE-Rx-FC

• FE-Tx-FC

• Rx-ICP

• Rx-Stuff

• Tx-ICP

• Tx-Stuff

• Rx-SES

• Rx-UAS

• Rx-UUS

• Tx-UUS

• FE-Rx-SES

• FE-Rx-UAS

• FE-Rx-UUS

• FE-Tx-UUS

IMA link media

detail extensive none(PPP and HDLC) Configured settings for keepalives.

• interval seconds—The time in seconds between successive keepalive requests.

The range is 10 seconds through 32,767 seconds, with a default of 10 seconds.

• down-count number—The number of keepalive packets a destination must

fail to receive before the network takes a link down. The range is 1 through

255, with a default of 3.

• up-count number—The number of keepalive packets a destination must receive

to change a link’s status from down to up. The range is 1 through 255, with a

default of 1.

Keepalive settings

detail extensive none(PPP and HDLC) Information about keepalive packets. (When no level of output

is specified, the word statistics is not part of the field name and the last seen

text is not displayed.)

• Input—Number of keepalive packets received by PPP.

• (last seen 00:00:00 ago)—Time since the last keepalive packet was

received, in the format hh:mm:ss.

• Output—Number of keepalive packets sent by PPP and how long ago the last

keepalive packets were sent and received.

• (last seen 00:00:00 ago)—Time since the last keepalive packet was sent,

in the format hh:mm:ss.

Keepalive statistics

Chapter 5: Monitoring Commands