User guide

idle-cycle-flag

Syntax idle-cycle-flag value;

Hierarchy Level [edit interfaces e1-fpc/pic/port],

[edit interfaces t1-fpc/pic/port],

[edit interfaces interface-name ds0-options],

[edit interfaces interface-name e1-options],

[edit interfaces interface-name e3-options],

[edit interfaces interface-name serial-options],

[edit interfaces interface-name t1-options],

[edit interfaces interface-name t3-options]

Release Information Statement introduced before Junos OS Release 7.4.

Statement introduced in Junos OS Release 12.2 for the ACX Series Universal Access

Routers.

Description Configure the value that the DS0, E1, E3, T1, or T3 interface transmits during idle cycles.

NOTE: When configuring E1 or T1 interfaces on 10-port Channelized E1/T1 IQE

PICs, the idle-cycle-flag statement must be included at the [edit interfaces

e1-fpc/pic/port] or [edit interfaces t1-fpc/pic/port] hierarchy level as

appropriate.

Options value—Value to transmit in the idle cycles:

• flags—Transmit the value 0x7E.

• ones—Transmit the value 0xFF (all ones).

Default: Flags

Required Privilege

Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.

Documentation

• Configuring the E1 Idle Cycle Flag on page 10

• Configuring the E3 Idle Cycle Flag

• Configuring the T1 Idle Cycle Flag

• Configuring the T3 Idle Cycle Flag

Chapter 4: Statement Summary