User guide

• pseudo-2e15-o151—Pattern is 2
15
– 1, as defined in the O151 standard.
• pseudo-2e17—Pattern is 2
17
– 1.
• pseudo-2e18—Pattern is 2
18
– 1.
• pseudo-2e20-o151—Pattern is 2
20
– 1, as defined in the O151 standard.
• pseudo-2e20-o153—Pattern is 2
20
– 1, as defined in the O153 standard.
• pseudo-2e21—Pattern is 2
21
– 1.
• pseudo-2e22—Pattern is 2
22
– 1.
• pseudo-2e23-o151—Pattern is 2
23
– 1, as defined in the O151 standard.
• pseudo-2e25—Pattern is 2
25
– 1.
• pseudo-2e28—Pattern is 2
28
– 1.
• pseudo-2e29—Pattern is 2
29
– 1.
• pseudo-2e31—Pattern is 2
31
– 1.
• pseudo-2e32—Pattern is 2
32
– 1.
• repeating-1-in-4—One bit in four is set to 1; the others are set to 0.
• repeating-1-in-8—One bit in eight is set to 1; the others are set to 0.
• repeating-3-in-24—Three bits in twenty four are set to 1; the others are set to 0.
Default: pseudo-2e3
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• Interface Diagnostics on page 87
• Configuring E1 BERT Properties on page 7
• Configuring E3 BERT Properties
• Configuring T1 BERT Properties
• Configuring T3 BERT Properties
• Examples: Configuring T3 Interfaces
• bert-error-rate on page 40
• bert-period on page 42
39Copyright © 2014, Juniper Networks, Inc.
Chapter 4: Statement Summary