User guide

dial-string [ dial-string-numbers ];
idle-timeout seconds;
initial-route-check seconds;
load-threshold number;
pool pool;
remote-name remote-callers;
watch-list {
[ routes ];
}
}
disable;
dlci dlci-identifier;
drop-timeout milliseconds;
dynamic-call-admission-control {
activation-priority priority;
bearer-bandwidth-limit kilobits-per-second;
}
encapsulation type;
epd-threshold cells plp1 cells;
fragment-threshold bytes;
input-vlan-map {
inner-tag-protocol-id;
inner-vlan-id;
(pop | pop-pop | pop-swap | push | push-push | swap | swap-push | swap-swap);
tag-protocol-id tpid;
vlan-id number;
}
interleave-fragments;
inverse-arp;
layer2-policer {
input-policer policer-name;
input-three-color policer-name;
output-policer policer-name;
output-three-color policer-name;
}
link-layer-overhead percent;
minimum-links number;
mrru bytes;
multicast-dlci dlci-identifier;
multicast-vci vpi-identifier.vci-identifier;
multilink-max-classes number;
multipoint;
oam-liveness {
up-count cells;
down-count cells;
}
oam-period (seconds | disable);
output-vlan-map {
inner-tag-protocol-id;
inner-vlan-id;
(pop | pop-pop | pop-swap | push | push-push | swap | swap-swap);
tag-protocol-id tpid;
vlan-id number;
}
passive-monitor-mode;
peer-unit unit-number;
Copyright © 2014, Juniper Networks, Inc.32
E1 Interfaces Feature Guide for Routing Devices