Quick Start Manual

Quick Start Guide, 61210908L1-13C, November 2006 Copyright © 2006 ADTRAN, All Rights Reserved
For more detailed documentation, visit us online at www.adtran.com.
Quick Start Guide
®
Total Access 904/908 P/N 1210904L1, 1210908L1
Total Access 904L1/908L1 Back Panel Layout
DSX-1 (T1 0/2) PINOUTS
NET (T1 0/1) PINOUTS
10/100BASET (ETH 0/1) PINOUTS
Pin Name Description
1 R Transmit data toward the DTE (Ring)
2 T Transmit data toward the DTE (Tip)
3—Unused
4 R1 Receive data from the DTE (Ring 1)
5 T1 Receive data from the DTE (Tip 1)
6-8 — Unused
Pin Name Description
1 R1 Receive data from the network (RIng 1)
2 T1 Receive data from the network (Tip 1)
3 — Unused
4 R Transmit data toward the network (Ring)
5 T Transmit data toward the network (Tip)
6-8 — Unused
Pin Name Description
1 TX1 Transmit Positive
2 TX2 Transmit Negative
3 RX1 Receive Positive
4, 5 — Unused
6 RX2 Receive Negative
7, 8 — Unused
CRAFT PINOUTS
VOICE CONNECTION
A single 50-pin female amphenol connector provides the interconnect wiring for the analog circuits
(FXS). Refer to the Total Access 900 Series Hardware Installation Guide on the ADTRAN OS System
Documentation CD for a detailed pinout.
BATTERY BACKUP CONNECTION
An optional battery backup system (P/N 1200641L1) is available for the Total Access 904/908. Refer
to the documentation available for your specific battery backup unit for more information on this
connection.
CONFIGURE YOUR APPLICATION
More detailed documentation for configuring your ADTRAN unit is provided on the ADTRAN OS
System Documentation CD included in your shipment. For more detail on hardware setup, refer to the
Hardware Installation Guide. For more detail on configuring your system, refer to the ADTRAN
Operating System (AOS) Command Reference Guide, configuration guides, and technical support
notes.
Pin Name Description
1 DCD Data Carrier Detect (output)
2 RD Receive Data (output)
3 TD Transmitted Data (input)
4 DTR Data Terminal Ready (input)
5 GND Ground - connected to unit chassis
6 DSR Data Set Ready (output)
7 RTS Request To Send - flow control (input)
8 CTS Clear To Send - flow control (output)
9 RI Ring Indicate (output)
Important: For additional details on product features, specifications,
installation, and safety, refer to the appropriate Hardware Installation
Guide on the ADTRAN OS System Documentation CD shipped with the
base unit and available online at www.adtran.com.