User manual

Total Access 600 Series User Manual © 2002, ADTRAN, Inc.
Total Access 600 Series T1 ATM IAD UIG/64200681L2-31B
Page 66
Voice Turn Up
Step Action
1
From the Total Access 600 main menu, select the W
AN
menu. (Here
you set up the ATM network.)
2
Select the
ATM C
ONFIG
menu.
3 Enter the I
DLE
C
ELLS
format for your network.
4
Set
D
ATA
S
CRAMBLING
appropriately for your network.
5
Back all the way out to the top level Total Access 600 menu, and then
select the
VOICE
menu. (From this menu, the appropriate Voice
information for working with the Voice Gateway is entered.)
6
Select C
ONFIG
, and from the C
ONFIG
menu, enter the Gateway type
under C
ALL CONTROL and enter the VPI and VCI values for
communicating with that Gateway.
C
ALL CONTROL
should be set to the Gateway type and the VPI and VCI
values should be set appropriately for your network.
7
To verify correct setup, use the S
TATUS
menu (under the V
OICE
menu)
to look at the current status of the voice connection.
Under S
TATUS
, you can view the G
ATEWAY
S
TATS
and information
about the voice PVC along with information about the POTs ports
available on the Gateway.
The G
ATEWAY
S
TATS
menu should show the Gateway Link is up (if
everything is configured correctly).
A visual inspection of the VOICE LED on the front panel will also yield
the status. Green = up. Red = Down.